-
Mini Micro JST 1.25mm 2 Pin Single Plug Wire Cable Connector JST 1.25mm Connectors
Mini Micro JST 1.25mm 2 Pin Single Plug Wire Cable Connector JST 1.25mm Connectors
The image shows a set of JST 1.25mm 2-pin connector cables.Product Description:
- Type: These are micro JST connectors, consisting of both male and female plugs with pre-attached wire leads.
Mini Micro JST 1.25mm 2 Pin Single Plug Wire Cable Connector JST 1.25mm Connectors
- Specifications: They have a 1.25mm pitch (the distance between the pins) and are typically used with 28 AWG wire. The wires are commonly colored red and black.
- Features: The connectors provide a secure and reliable connection for various electronic applications. They are lightweight and have low resistance.
- Common Uses: These connectors are often used for small electronic projects, including CCTV cameras, LED light strips, Li-Po batteries, and other household appliances.
The product is a JST 1.25mm 2-pin connector with wire leads.These types of connectors are widely used in a variety of electronics projects and devices due to their small size and reliability.Key features often associated with this type of connector include:
- Pitch: 1.25mm.
- Wire: The wires are typically 28AWG, and the length can vary.
- Material: The connectors are often made of plastic, with tinned copper wire leads.
- Applications: They are commonly used in mini RC helicopters, LED strips, batteries, and other small electronic devices.
The name “JST” refers to the manufacturer, Japan Solderless Terminal, which produces many different series and pitches of connectors. The specific type of connector in the image is a two-pin version with a pitch of 1.25mmBased on the image and product information, here is a summary of the JST 1.25mm 2-pin connector cables:FeatureDescriptionProduct TypeJST 1.25mm 2-pin connector plug with wiresConnector TypeJST 1.25mm 2-pin, single-head connectorPin Count2 pinsWire ColorsRed and blackApplicationsCCTV cameras, LED boards, drones, RC models, circuit boards, and various electronic projects
10.00৳20.00৳50% offWhat's appMini Micro JST 1.25mm 2 Pin Single Plug Wire Cable Connector JST 1.25mm Connectors
10.00৳20.00৳50% off - Type: These are micro JST connectors, consisting of both male and female plugs with pre-attached wire leads.
-
Mini Router UPS Circuit Board 42W V4
Key Features & Specifications
- Model: V4, 42W Max Output
- Input: 12V DC (from a good quality adapter)
- Output: Multiple fixed voltage outputs, including 12V, 9V, and 5V
- Maximum Power: 42W total
- Battery: Supports 7.4V 2S Li-ion batteries (e.g., 18650)
- Battery Management: Built-in 7.5A BMS and auto battery full charge function
- Charging: Constant current 1.5A battery charging
- Protections: Overload, Overvoltage, Low Voltage, and Short-circuit protection
- Switchover: Ultra-fast power shifting for seamless transition during a power failure
- Indicators: 4-step battery percentage indicator
850.00৳1,300.00৳35% offWhat's appMini Router UPS Circuit Board 42W V4
850.00৳1,300.00৳35% off -
NEMA 17 Steppr Motor Accessories Bracket Support Mounting L Type Bracket Mount 42 Stepping Stepper Motor Nema17 Motor Holder
Product sellpoints
-
Exitrax Mounting Kit|Rack Mount Accessories|Versatile Mounting Options:Available in packs of 1 to 10, this NEMA 17 L Bracket offers flexible mounting solutions for 3D printers.
-
Durable Material:Crafted from high-quality materials, this L Bracket ensures long-lasting support for your stepper motor.
-
Easy Installation:The L Type Bracket Mount is designed for a hassle-free setup, making it a breeze to integrate into your system.
-
Precision Fit:The NEMA 17 Mounting L Bracket is engineered to fit the NEMA 17 stepper motor perfectly, ensuring stability.
-
Enhanced Stability:The L Bracket's robust design provides exceptional stability for your 3D printer, reducing vibrations.
500.00৳600.00৳17% offWhat's appNEMA 17 Steppr Motor Accessories Bracket Support Mounting L Type Bracket Mount 42 Stepping Stepper Motor Nema17 Motor Holder
500.00৳600.00৳17% off -
-
Orginal Jongfa 1000W Solar Inverter + Battery Charger USB with Auto Cut Off UPS (4 in 1)
-
Jongfa 1000W Solar Inverter + Battery Charger USB with Auto Cut Off UPS (4 in 1)
The Jongfa SC-1000 is a versatile and reliable 1000W Inverter & Charger designed to convert 12V DC power to 220V AC, suitable for powering various household and electronic devices. It features integrated IPS (Uninterrupted Power Supply) functionality, a built-in battery charger with auto cut-off (max 10A), and a 5V 1A USB port for convenient mobile device charging.
Key Features & Specifications:
- Model: SC-1000
- Power Output: 1000 Watts (Peak Power: 600W±5%)
- Input Voltage: DC 12V
- Output Voltage: AC 220V (Range: 226V – 233V)
- Waveform: Modified Sine Wave
- USB Output: 5V / 1A
- Functions: Inverter, Charger, UPS
- Built-in Safety Protections: Includes overload, overvoltage, low voltage, high temperature, output short circuit, and reverse connecting protection.
- Cooling System: Features a built-in fan with intelligent MCU control for optimal cooling and extended lifespan.
- Design: Smart, light, and portable design with an aluminum alloy shell, making it suitable for home, office, off-grid, and automotive applications.
- Applications: Ideal for home and office power backup, solar off-grid systems, vehicle power conversion, and charging small electronic devices.
4,000.00৳4,500.00৳What's appOrginal Jongfa 1000W Solar Inverter + Battery Charger USB with Auto Cut Off UPS (4 in 1)
4,000.00৳4,500.00৳ -
-
PC817 Optocoupler
The PC817 is a compact optoisolator (photocoupler) that uses an internal infrared LED and phototransistor to transfer signals between two circuits without a physical electrical connection.- Primary Function: Provides high-voltage isolation (up to 5kV) to protect sensitive low-power components (like microcontrollers) from high-voltage noise or power spikes.
- Package: Standard 4-pin DIP (Dual In-line Package).
- Key Specs: 80V max collector-emitter voltage, 50mA collector current, and a 1.2V typical input forward voltage.
- Best For: Switching power supplies, noise suppression, signal isolation, and relay driving.
Would you like to see a list of pin-compatible equivalents or a simple circuit example?10.00৳20.00৳50% offWhat's appPC817 Optocoupler
10.00৳20.00৳50% off -
QST Express 7-Piece Mini Drill Chuck Set
A compact 7-piece brass mini drill chuck and collet set designed to convert small DC motors into precision drills. It features 5 interchangeable collets ranging from 0.5mm to 3.0mm for holding micro drill bits. Ideal for DIY electronics, PCB drilling, and hobbyist work on soft materials like wood, plastic, and thin aluminum.Set Includes:- 1x Brass Chuck Adapter
- 5x Brass Collets (0.5mm, 1.0mm, 1.5mm, 2.5mm, 3.0mm)
- 1x Allen Wrench
Would you like to check the price for a specific motor shaft size, like 3.17mm or 5mm?200.00৳230.00৳13% offWhat's appQST Express 7-Piece Mini Drill Chuck Set
200.00৳230.00৳13% off -
RS555 DC 12V 3.17mm D-Shaft Fan Motor For DC Mini Charger Fan
RS555 DC 12V 3.17mm D-Shaft Fan Motor For DC Mini Charger Fan
The DC 555 D-Shaft Fan Motor is a versatile and efficient brushed DC motor (also known as RS-555 or RS555) widely used in various applications requiring reliable and efficient motion, particularly in cooling systems, small appliances, and DIY projects.Key Features and Specifications:- Type: Brushed DC Motor with a full metal body for enhanced durability.
- Voltage Compatibility: Typically operates at 12V DC, with an operating range often extending from 6V to 18V or even up to 36V, depending on the specific model.
- Shaft Design: Features a “D-Shaft” (specifically 3.17mm or 2.5mm D-Shaft, depending on the model) for secure coupling with components like fan blades or mechanical parts, and also offers flexibility with a normal round back shaft in some versions.
- Speed & Torque: Offers high-speed capabilities with no-load speeds ranging from 1,000 RPM to 30,000 RPM (depending on voltage and specific motor) and high torque output, suitable for demanding applications.
- Efficiency & Noise: Designed for efficient power consumption and low-noise operation, making it suitable for noise-sensitive environments and battery-operated devices.
- Compact & Durable: Characterized by its compact size (around 36mm diameter and 57mm length) and robust construction, ensuring long-lasting performance.
Common Applications:- Cooling Systems: Ideal for rechargeable DC fans, stand fans, and other ventilation applications due to its high airflow capability.
- DIY Projects & Robotics: Popular in custom builds, electric toys, RC models, and various robotic applications where reliable rotational motion is required.
- Small Appliances & Tools: Used in mini drill machines, water pumps, juicers, humidifiers, and other small tools requiring a balance of power, size, and efficiency.
250.00৳280.00৳11% offWhat's appRS555 DC 12V 3.17mm D-Shaft Fan Motor For DC Mini Charger Fan
250.00৳280.00৳11% off -
Single Channel 5V Relay Module best quality/ 1 Channel 5V Relay Module
Single Channel 5V Relay Module best quality/ 1 Channel 5V Relay Module
Description:
The product shown is a JQC-3FF-S-Z single-channel relay module manufactured by Tongling. It is designed to allow a low-power microcontroller, such as an Arduino or Raspberry Pi, to control high-voltage and high-current devices like lights, motors, or other AC loads. The relay module is available in two common versions based on the coil voltage: 5VDC and 12VDC.Key Features and Specifications:
- Model: JQC-3FF-S-Z, a widely used and compact relay.
- Channels: Single-channel, allowing control of one independent circuit.
- Load Capacity: The relay contacts are rated to handle a maximum load of 10A at 250VAC or 15A at 125VAC.
- Control Interface: It features screw terminals for easy connection to the high-power load (Common, Normally Open, Normally Closed) and pins for connection to the control circuit. The module is typically triggered by a low-level signal from a microcontroller.
- Indicators: The module includes indicator LEDs to show the power status and when the relay is activated.
- Isolation: The design includes an isolation groove between the control and load areas to enhance safety.
- Applications: Commonly used in projects involving home automation, industrial control, and other electronic devices.
70.00৳100.00৳30% offWhat's appSingle Channel 5V Relay Module best quality/ 1 Channel 5V Relay Module
70.00৳100.00৳30% off -
Soil Moisture Sensor Module
The YL-69 Soil Moisture Sensor is a simple, cost-effective module designed to measure the water content in soil. It works by detecting electrical resistance: drier soil conducts less electricity, while wet soil conducts more.Core FunctionIt provides two ways to read data: a Digital Output (D0) that acts as a simple switch (turning “on” when soil gets too dry) and an Analog Output (A0) for precise moisture level tracking.Quick Highlights- Plug-and-Play: Easily connects to Arduino, ESP32, or Raspberry Pi.
- Adjustable: Features a built-in dial (potentiometer) to set your own “dry soil” alert level.
- Dual Indicator: Includes LEDs to show power status and when the moisture threshold is reached.
- Versatile: Ideal for DIY automatic plant watering systems and smart garden projects.
Would you like a step-by-step guide on how to wire this to your controller?100.00৳150.00৳33% offWhat's appSoil Moisture Sensor Module
100.00৳150.00৳33% off -
SS22F25-G7 2-Position DPDT 2P2T Panel Mount Mini Slide Switch Soldering Lug
Key specifications
- Switch type: Slide switch.
- Functionality: Double Pole, Double Throw (DPDT) with a center-off position.
- Terminals: 6 pins, typically arranged in two rows of three. This allows it to control two separate circuits at once.
- Positions: 2 positions (often with a detent for a center “off” position).
- Action: The switch has a physical sliding mechanism to change its state.
- Electrical rating:
- 3A at 250V AC.
- 6A at 125V AC.
- Dimensions: Approximately 22 x 13 x 13 mm (L x W x H).
- Construction: Made of a plastic housing with metal contacts.
- Mounting: Often designed for panel mounting for use in custom enclosures or products.
10.00৳15.00৳33% offWhat's appSS22F25-G7 2-Position DPDT 2P2T Panel Mount Mini Slide Switch Soldering Lug
10.00৳15.00৳33% off -
Suogfa SC-3000 3000W DC 12V to AC 230V Smart Solar Power Inverter & Battery Charger with UPS Function
Product Short DescriptionThe Suogfa SC-3000 is a 3000W hybrid power inverter and intelligent 20A battery charger featuring automatic UPS functionality. This heavy-duty device converts 12V DC battery power into 230V AC home electricity while offering an integrated 5V USB charging port. It provides instant emergency backup power during blackouts, safely charges lead-acid batteries via mains power, and integrates easily with external solar panels for off-grid operations.Would you like to know the price and availability of this product in your market, or do you need to calculate the ideal solar panel wattage required to run it?4,000.00৳4,500.00৳11% offWhat's appSuogfa SC-3000 3000W DC 12V to AC 230V Smart Solar Power Inverter & Battery Charger with UPS Function
4,000.00৳4,500.00৳11% off -
Super Speed TX-3000G++++ PLUS High Pressure Air and Gas Pump.
- Purpose: Boosts gas flow for stoves and generators.
- Control: Includes a knob to manually adjust pressure levels.
- Efficiency: Uses only 7.5W of power with an automatic on/off feature.
- Performance: Delivers a flow rate of 30–35 Liters Per Minute (LPM).
- Build: Made of durable, heat-resistant ABS plastic.
950.00৳1,100.00৳What's appSuper Speed TX-3000G++++ PLUS High Pressure Air and Gas Pump.
950.00৳1,100.00৳ -
Traffic Light LED Display Module for Arduino Red Yellow Green 5mm LED Mini-Traffic Light for Traffic Light System Model
A traffic light module for Arduino is a component designed to simulate a real-world traffic light system, typically featuring red, yellow, and green LEDs. These modules are used in various projects, including educational exercises, traffic management simulations, and intelligent transportation systems.
Key features and principles:
-
LEDs:
The module integrates red, yellow, and green LEDs, often 5mm in size, which represent the different states of a traffic light.
-
Control:
The LEDs are controlled by an Arduino or other microcontrollers using digital output pins. A
HIGHorLOWsignal can directly turn the corresponding LED on or off. -
PWM (Pulse-Width Modulation):
Some modules and applications may utilize PWM to control the brightness of the LEDs, allowing for more dynamic visual effects.
-
Built-in components:
Many modules include built-in resistors and other necessary components to connect the LEDs safely to the microcontroller, preventing overcurrent and damage.
-
Simulating traffic flow:
By programming the Arduino, the module can be made to cycle through the traffic light sequence (green, yellow, red) with specified timings, simulating traffic flow.
-
Compatibility:
These modules are generally compatible with various microcontroller platforms, including Arduino, Raspberry Pi, and micro:bit.
Applications:
- Educational projects: Used to teach basic electronics, LED control, and programming concepts.
- Traffic management simulations: Creating scaled-down models of traffic intersections to test control algorithms.
- Visual displays: Incorporating traffic light indications into larger projects as a visual feedback mechanism.
70.00৳100.00৳30% offWhat's appTraffic Light LED Display Module for Arduino Red Yellow Green 5mm LED Mini-Traffic Light for Traffic Light System Model
70.00৳100.00৳30% off -
-
Type C BMS 2S 2A Step-Up Boost Li-Po Polymer Charger Module,
The Type C BMS 2S 2A is a compact step-up (boost) charger module that converts a standard 5V USB-C input into an 8.4V output to charge two lithium batteries (18650/21700) connected in series.Quick Specs- Input: USB Type-C (DC 3V–6V; 5V recommended).
- Output: 8.4V (specifically for 2S battery packs).
- Charging Current: 2A.
- Status Lights: Onboard LEDs indicate “Charging” (CR) and “Full/Standby” (OK).
- Protection: Includes over-voltage, short-circuit, and battery-leakage protection.
This module is ideal for DIY power banks or upgrading older 7.4V electronics to modern USB-C charging.Would you like to see a connection diagram for your battery setup?120.00৳150.00৳20% offWhat's appType C BMS 2S 2A Step-Up Boost Li-Po Polymer Charger Module,
120.00৳150.00৳20% off -
Type-C USB Mini Humidifier DIY Kits Mist Maker Driver Circuit Board 1 Way Fogger Atomization Film Atomizer Sheet Oscillating
- mist mekar
- 1 driver
- 1 mist sensor
- 1stick
- 1 set cape
- orginal china brand
170.00৳250.00৳32% offWhat's appType-C USB Mini Humidifier DIY Kits Mist Maker Driver Circuit Board 1 Way Fogger Atomization Film Atomizer Sheet Oscillating
170.00৳250.00৳32% off -
Universal Switched-Mode Power Supply (SMPS) Module,
This is a 7.8V 2A Universal SMPS Power Module, a high-efficiency internal circuit board designed for electronic repairs.- Output: Regulated 7.8V DC at 2 Amps (15.6W).
- Input: Universal AC 110V–240V support.
- Design: Compact, open-frame bare board (Model SX-7820) with pre-drilled mounting holes.
- Main Uses: Direct replacement part for rechargeable AC/DC fans, humidifiers, and emergency lights.
- Reliability: Provides stable power for both charging 6V batteries and driving small DC motors.
Would you like to know the specific wiring points for installation?20.00৳250.00৳92% offWhat's appUniversal Switched-Mode Power Supply (SMPS) Module,
20.00৳250.00৳92% off
